Musical Fidelity A308 CR Manual De Usuario

STARTING . . . .

Press the power button on the A308 Pre-
amplifier - the 

blue

LED on the front panel

will light indicating that the unit is ready
for use.  However, for about five seconds
no sound will be heard from your speakers,
and the red mute LED will light to confirm
initial mute action.

Unless using your pre-amplifier for off-tape
monitoring (see paragraph opposite     )
ensure that the TAPE MONITOR button
has not been pressed accidently, as other-
wise no sound will be heard through the
speakers.

Select the required audio input source by
pressing an appropriate function button on
the front panel or the remote control, and
adjust the volume control to obtain the pre-
ferred sound level.

To record, simply select the required source
with the input selector button on the front
panel.  This source will now be routed to

the A308 

CR

Pre’s TAPE RECORD output

sockets for recording by the external tape
deck.
You will also be able to hear the selected
source through the loudspeakers.

Note - adjustment of the volume control has
no effect on the recording level.

Issue 3:  July 2002

In conjunction with a 3-head cassette deck,
off-tape monitoring allows the user to com-
pare the recorded sound with the original
whilst a recording is being made.  To do
this, first select the required source in the
normal way and start recording.  The
TAPE MONITOR button on the front
panel can now be used to switch between
the source sound and its recorded version.

The red LED just above the tape monitor
button indicates that the tape monitor func-
tion is operating.

Note that the recorded sound is selected
when this LED is lit.  On some 3-head tape
decks there is an additional 'tape/source'
switch which must be in the 'tape' position
for the above arrangement to work.

If in doubt, please refer to your tape deck
operating manual.