CyberData Part #010861 Manual De Usuario

CyberData Corporation

930106C

VoIP Loudspeaker Amplifier Operations Guide

 Installing the VoIP Loudspeaker Amplifier

 

Configure the Loudspeaker Amplifier Parameters

20

2. On the SIP Setup page, enter values for the parameters indicated in 

.

3. After changing the parameters, click Save Settings.

SIP Server*

Enter the SIP server represented as either a numeric IP 
address in dotted decimal notation or the fully qualified 
host name (FQHN) up to 64 characters.

Remote SIP Port*

Enter the Remote SIP Port number (default is 5060).

Local SIP Port*

Enter the Local SIP Port number (default is 5060).

SIP User ID*

Enter the SIP User ID (up to 25 alphanumeric characters).

Authenticate ID*

Enter the Authenticate ID (up to 25 alphanumeric 
characters).

Authenticate Password*

Enter the Authenticate Password (up to 25 alphanumeric 
characters).

SIP Registration*

Enable/Disable SIP Registration.

Unregister on Reboot*

• Select Yes to automatically unregister the paging 

amplifier when it is rebooted. 

• Select No to keep the paging amplifier registered when it 

is rebooted. 

Register Expiration*

Enter the SIP Registration lease time in minutes (default is 
60 minutes).

Click on this button to save your configuration settings. 
Changing a parameter that has an asterisk next to it will 
cause a system reboot when saved.

Link to the Speaker Setup page.

Link to the MGROUPS Setup page.

Link to the Network Setup page.

Link to the Upgrade Firmware page.

Link to the Home page.