Crate Amplifiers BFX-220H Manual De Usuario
BFX-220H Bass Amplifier
with
D
igital
S
ignal
P
rocessing
©2001 SLM Electronics • 1400 Ferguson Avenue • St. Louis, MO 63133 U.S.A.
www.crateamps.com
Technical Specifications:
Maximum Input Signal Level Accepted
17 volts peak to peak (-15dB switch depressed)
Input Impedance
500k ohms (-15dB switch out), 75k ohms (-15dB switch depressed)
Signal to Noise Ratio
75dB typical
Output Power Rating
160 watts RMS @ < 5% THD, 8 ohm load, 120VAC line
220 watts RMS @ < 5% THD, 4 ohm load, 120VAC line
Gain @ 1kHz
67dB with EQ flat, Contour off
EQ Section
20dB range (±10dB) @ 40Hz, 100Hz, 225Hz, 625Hz, 1.6kHz, 4kHz,
8kHz and 16kHz
Power Requirements
110-120VAC, 60 Hz250VA
110-115VAC, 50/60 Hz250VA
230VAC, 50/60 Hz250VA
Size and Weight
7-1/8” H x 19-1/2” W x 12” D, 30 lbs
Crate continually develops new products, as well as improves existing ones. For this reason,
specifications and information in this manual are subject to change without notice.
47-589-52 • 08/01
Declaration Of Conformity
#34, Effective 01-01-2001
Manufacturer’s Name:
SLM Electronics
Production Facility:
11880 Borman Drive, St. Louis, MO 63146, USA
Production Facility:
700 Hwy 202 W, Yellville, AR 72687, USA
Shipping Facility:
1400 Ferguson Ave., St. Louis, MO 63133, USA
Office Facility:
1400 Ferguson Ave., St. Louis, MO 63133, USA
Product Type:
Audio Amplifier
Complies with Standards:
LVD:
92/31/EEC, 93/68/EEC, & 73/23/EWG
Safety:
EN60065
EMC:
EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3
& EN61000-3-3
Supplementary information provided by your local Sales & Services Office or:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175