Orion Car Audio HP-2600 Manual De Usuario
RECORD YOUR SERIAL NUMBER AND DATE
To ensure your warranty (see back cover), please record the following information regard-
ing your new amplifier.
ing your new amplifier.
Model:
__________________________________________________
Serial Number:
__________________________________________________
Date of Purchase: __________________________________________________
Purchased from:
__________________________________________________
END PANEL LAYOUTS
HP-2300, HP-2400, HP-2600 Controls
1.
Hi Input (high level input) - Accepts 1V to 10V input from the head unit’s speaker
output. The amplifier will automatically wake-up when the input is greater than 1V.
High level input harness shown below.
output. The amplifier will automatically wake-up when the input is greater than 1V.
High level input harness shown below.
2.
RCA Input - accepts RCA input from a head unit, preamplifier, or equalizer.
3.
RCA Line Output - provides easy connection to additional amplifiers.
4.
Gain Control - continuous adjustment for full power output.
5.
Intelli-Bass - continuously adjusts from 0 to 12dB of boost centered at 45Hz.
6.
Remote Bass Jack - connects optional HP-RB1 remote bass control to control the
bass level from the driver’s seat. This control is only active when the crossover
switch is at the LPF setting.
bass level from the driver’s seat. This control is only active when the crossover
switch is at the LPF setting.
7.
LPF (Low-Pass Frequency Control) - adjusts the frequency (50Hz–500Hz) of the
upper crossover frequency. When set for this position the optional remote bass
control is active.
upper crossover frequency. When set for this position the optional remote bass
control is active.
8.
X-Over (cross-over) - activates LPF (low pass crossover), FLAT (all pass), or HPF
(high pass crossover).
(high pass crossover).
9.
HPF (High-Pass Frequency Control) - adjusts the frequency (50Hz–500Hz) of the
lower crossover frequency.
lower crossover frequency.
10. Power LED - when illuminated (green) indicates that the amplifier is on.
Protect LED - when illuminated (red) indicates that the amplifier protective cir-
cuitry has been activated due to thermal, output short, supply undervoltage or
supply overvoltage.
cuitry has been activated due to thermal, output short, supply undervoltage or
supply overvoltage.
GAIN
MIN MAX
R CH
R CH
L CH
L CH
INPUT
LINE OUT
REMOTE
LPF FLAT HPF
X-OVER
HPF
50Hz 500Hz
LPF
50Hz 500Hz
POWER
(GREEN)
PROTECT
(RED)
1
2
3
4
INTELLI-BASE
0dB 12dB
5
6
7
8
9
10
HI INPUT
3
© 2005 Directed Electronics, all rights reserved