EAW KF730 Manual De Usuario

 

The signal processing adjustments determined by EAW for the KF730 Series Array should be 
fully implemented “as is.” These settings are determined from extensive measurements in typical 
venues as well as the theory of curved sources from the acoustical work of physicists Harry Olsen 
and Leo Beranak. As such, they will normally provide excellent results in a variety of venues. 
 
The signal processor settings are provided in the KF730 Wizard. The Wizard can upload settings 
to EAW MX8700 Series processors and selected third party DSP processors. 
 
5.4.2 

Even though they can be set to numerically equal values, the actual transfer function (magnitude 
and phase) of the processing depends on the particular digital processor. The reason is that 
different algorithms can be and are used to implement the same processing functions. The 
factory settings were determined using EAW’s MX8750 Digital Signal Processor. If you will be 
using a non-EAW DSP, contact EAW about its compatibility with the EAW factory settings. 
 

In order for Divergence Shading to work properly, all amplifiers for all passbands must be set to 
the same voltage gain, regardless of their power output ratings. Among other things, equal 
amplifier gains are required to maintain array coherence throughout the venue. 
 
NOTE: This does NOT mean the same input sensitivity, but the same input to output voltage 
gain. Consult your amplifier manufacturer if this cannot be readily determined. Do not selectively 
boost or attenuate loudspeaker levels at the amplifiers in order to achieve consistent SPL at 
various distances. This is achieved by adjusting the array curvature as described above.  
 

EAW recommends that 1/3 octave or careful use of parametric equalization be used to modify 
performance to accommodate a particular program, venue characteristics, or personal taste.  
 
5.6.2 Array 

SMAART - The SmaartLive program from SIA Software Company is an ideal tool to use to 
measure and optimize a KF730 array for a particular venue. This is a fast, yet sophisticated, 
process that will indicate problem areas due to particular venue characteristics. Usually it is a 
matter of applying small amounts of 1/3 octave or parametric equalization to adjust significant 
anomalies. A demo version of SmaartLive is available at www.siasoft.com. 
 

As is true of all professional loudspeaker systems, the performance of the KF730s and SB730s 
depends on amplifiers delivering an adequate supply of clean power. Determining the appropriate 
power amplifier wattage for a given loudspeaker and application is a subject of some debate. In 
fact, there are three distinct issues regarding amplifier power as discussed in the next sections: 
“Power Ratings,” “Selecting an Appropriate Amplifier Size,” and “Operating Limits.” 
 
For more information on selecting amplifiers, please consult EAW’s Technical Paper on Amplifier 
Power, available on the EAW web site; or contact EAW Applications Support Group. 
 
5.7.1 Power 

The KF730 is a bi-amplified loudspeaker, requiring one LF and one MF/HF amplifier channel. The 
SB730 has two drivers (SUB 1 and SUB 2) wired separately to the input connectors. This means 
the drivers can be connected in parallel to a single amplifier channel or each can be connected to 
a separate amplifier channel.