Yamaha DSP-Z11 Manual De Usuario

■ Multi CH Assign (Multi channel assignment)
Use this feature to set the direction of the signals input into the 
center, subwoofer and surround channels when a source component 
is connected to the MULTI CH INPUT jacks.

Input Channels (Input channels)
Use this setting to select the number of channels input from an 
external decoder (see page 35).

Depending on the settings of the zone configuration, no sound is output at the surround 
back speakers even if you set “Input Channels” to “8ch”. In this case, select “6ch” and 
set the audio output setting of the source component to 6 channels.

Front Input 
(Front left and right channels input jacks)
If you selected “8ch” in “Input Channels”, you can select analog 
jacks at which front left and right channel signals from an external 
decoder will be input.
Choices: CD, CD-R, MD/TAPE, BD/HD DVD, DVD, DTV, 

CBL/SAT, DVR, VCR, V-AUX 

If you have renamed an input source in “Rename” (see page 82), the name of the input 
source appears in the choices of this parameter.

■ BGV (Back ground video)
Use this feature to select the video source played in the background 
of the sources input at the MULTI CH INPUT jacks.

If you have renamed an input source in “Rename” (see page 82), the name of the input 
source appears in the choices of this parameter.

■ Play Style (Playback styles)
Use this feature to adjust the playback style according to your 
preference. You can shuffle songs in a random order or repeat one 
specific song or a sequence of songs.

Repeat (Repeat)
Use this feature to set this unit to repeat one song or a sequence of 
songs.

• If “Repeat” is set to “Single”, the setting will be reset to “Off” when this unit is 

turned off.

• When you set “BGV” to “Last”, you can select the background video source by using 

the remote control only.

Shuffle (Shuffle)
Use this feature to set this unit to play songs or albums in a random 
order.

■ USB Select (USB port select)
Selects the component connected to the front or rear USB port as 
the input source (see page 37).

Use this menu to manually adjust any speaker setting.

y

• Most of the parameters described in the basic menu are set automatically when you 

run “Auto Setup”. You can use the basic menu to make further adjustments, but we 
recommend running “Auto Setup” first.

• You can reset these parameters by performing the “Auto Setup” procedure (see 

• If your subwoofer can adjust the output volume and the crossover frequency, set the 

volume to about half way (or slightly less) and set the crossover frequency to the 
maximum.

■ Test Tone (Test tone)
Turns the test tone output on or off for “Speaker Set”, “Speaker 
Distance”, and “Speaker Level” settings.

• Loud test tones will be output when “On” is selected. In this case, make sure no 

children are present in the listening room.

• This function is automatically turned off if you exit “Basic”.

■ THX Set (THX settings)
Use this feature to set the parameters to optimize the THX Surround 
modes (see page 73).

THX Ultra2 SWFR (THX Ultra2 subwoofer setting)
Use this feature to select whether the connected subwoofers are the 
THX Ultra2 certified subwoofers.

Select “6ch” the connected component outputs discrete 
6-channel audio signals.

Select “8ch” the connected component outputs discrete 
8-channel audio signals. Also set “Front Input” (see 
below) to the analog audio jacks at which the front left 
and right channel signals output from the connected 
component are input.

BD/HD DVD, 
DTV, CBL/SAT, 
DVD, DVR, VCR, 
V-AUX

Selects the corresponding input source as the background 
video source.

Automatically selects the last selected video source as the 
background video source.

Does not play the video source in the background.

Deactivates the repeat function.

Repeats one song. “

” appears in the top right corner 

of the playback status screen.

Repeats a sequence of songs. “

” appears in the top 

right corner of the playback status screen.

Deactivates the shuffle function.

Play songs or albums in a random order. “

” appears 

in the top right corner of the playback status screen.

Selects the component connected to the front USB port as 
the input source.

Selects the component connected to the rear USB port as 
the input source.

This unit does not output the test tone for the “Speaker 
Set”, “Speaker Level”, and “Speaker Distance” settings.

This unit outputs the test tone for the “Speaker Set”, 
“Speaker Level”, and “Speaker Distance” settings.
While “Test Tone” is set to “On”, the volume level is 
automatically set to 0 dB.

Select this setting when the connected subwoofers are the 
THX Ultra2 certified subwoofers.

Select this setting when the connected subwoofers are not 
the THX Ultra2 certified subwoofers.