Yamaha DSP-Z11 Manual De Usuario

Auto (Automatic audio delay adjustment)
Use this feature to make fine adjustments of the audio and video 
synchronization when you set “HDMI Auto” to “On”.
Control range: 0 to 240 ms
Control step: 1 ms

y

“offset” indicates the difference between the value of the audio delay that this unit sets 
automatically and the value of the audio delay that you set in “HDMI Auto”. This unit 
stores the value of “Offset” and applies the value to other automatic lip sync compatible 
video monitors.

Manual (Manual audio delay adjustment)
Use this feature to adjust the delay of the sound output manually to 
synchronize audio with video images when you set “HDMI Auto” 
to “Off”.
Control range: 0 to 240 ms
Control step: 1 ms

■ Pure Direct (Pure Direct)
Use this feature to select whether this unit outputs the video signals 
when this unit is in the Pure Direct mode.

You cannot use the GUI menu while this unit is in the Pure Direct mode even if “Pure 
Direct” is set to “Video On”.

■ Channel Mute (Channel mute)
Use this feature to mute specific speaker channels.

Mode (Mode)
Use this feature to activate or deactivate the “Channel Mute” setting 
for each speaker.

Each speaker settings
Select whether this unit mutes each speaker channel when you set 
“Mode” to “Enable”.

Use this menu to adjust the video parameters.

Use the “VIDEO” in “INITIALIZE” to set the parameters in “Manual Setup (Video)” 
(except “Short Message” and “On Screen”) to the factory presets (see page 120).

■ Conversion (Video conversion)
Use this feature to activate or deactivate the video scaling as well as 
the HDMI up-conversion of the analog video signals input at the 
VIDEO, S VIDEO, and COMPONENT VIDEO jacks.

• For optimal video performance, THX Ltd. recommends that you set “Conversion” to 

“Off” to allow video signals to pass through the system without processing (e.g., 
video signals input at the COMPONENT VIDEO jacks are output at the 
COMPONENT VIDEO MONITOR OUT jacks without any processing).

• The converted video signals are only output at the MONITOR OUT jacks. When 

recording a video source, you must make the same type of video connections between 
each component.

• When composite video or S-video signals from a VCR are converted into component 

video signals, the picture quality may suffer depending on your VCR.

• If “Conversion” is set to “Off”, the “Component I/P”, “HDMI Resolution”, “HDMI 

Processing”, “HDMI Aspect”, and “Short Message” features are deactivated.

• Set “Conversion” to “On” to display the short message.
• This unit does not convert 480 line video signals and 576 line video signals 

interchangeably.

• The analog component video signals with 480i (NTSC)/576i (PAL) of resolution are 

converted into the S-video or composite video signals and output at the S VIDEO 
MONITOR OUT and VIDEO MONITOR OUT jacks.

• Even when “Conversion” is set to “On”, HDMI digital signals are not converted to 

analog video signals.

• This unit cannot convert the signals input at the VIDEO or S VIDEO jacks and 

displays the video images correctly depending on the input source component and the 
source played on the component. In such cases, set “Conversion” to “Off”.

• When non-standard video signals (such as video signals from a video game console) 

are input, this unit does not display short messages in the video monitor even if 
“Conversion” is set to “On”.

• When the analog component video signals with 480p/576p of resolution are input at 

the COMPONENT VIDEO jacks and the video monitor is connected to the VIDEO 
MONITOR OUT or S VIDEO MONITOR OUT jack on this unit, the GUI screen is 
not displayed in the video monitor.

Select this setting if the connected video monitor is 
compatible with the automatic lip sync. Use “Auto” to 
make fine adjustments of the audio and video 
synchronization.

Select this setting if the video monitor is not compatible 
with the automatic lip sync or you do not want to use the 
automatic lip sync. Use “Manual” to adjustment the 
audio and video synchronization.

Does not output video signals.

Outputs video signals. For the better sound quality, this 
unit only activates the limited video features.

Deactivates the “Channel Mute” function.

Activates the “Channel Mute” function.

Mutes the selected speaker channel.

Does not mute the selected speaker channel.

Front left

Front right

Center

Surround left

Surround right

Surround back left

Surround back right

Front presence left speaker

Front presence right speaker

Rear presence left speaker

Rear presence right speaker

Subwoofer left

Subwoofer right

Converts composite, S-video, and component video 
signals interchangeably and up-converts composite, S-
video, and component video signals to HDMI video 
signals.

Does not convert any signals.