Behringer BXL3000A Manual De Usuario
5
ULTRABASS BXL450A/BXL900A/BXL1800A/BXL3000A
2. CONTROL ELEMENTS AND CONNECTIONS
2. CONTROL ELEMENTS
AND CONNECTIONS
Fig. 2.1: The input section
INPUT. Connect your bass guitar to this input jack on the
ULTRABASS (¼" TS jack).
The GAIN 1 control determines the input gain on channel 1.
Use the CH 2 button to switch over between the two
The GAIN 1 control determines the input gain on channel 1.
Use the CH 2 button to switch over between the two
channels. The CH 2 button lights up when channel 2 has
been activated. On the models BXL1800, BXL3000,
BXL1800A and BXL3000A, the channels can also be
selected using the foot switch shipped with the unit.
The GAIN 2 control sets the degree of distortion of
The GAIN 2 control sets the degree of distortion of
channel 2. The further the control is turned clockwise,
the higher the degree of distortion.
SHAPE is a special filter for your personal sound design. It
SHAPE is a special filter for your personal sound design. It
gives you numerous options for shaping your bass sound.
Application examples of the shape function can be found
in chapter 3.2.2.
+
The Shape filter is only effective on channel 2. The
signal in channel 1 remains unprocessed.
Use the LEVEL control to adjust the volume of channel 2.
Use this control to achieve the balance in volume that you
want between channels 1 and 2.