Alpine MRP-M500 Manual De Usuario
5
Español
Français
English
ALPINE MRP-M500 68-10872Z21-A (EN/FR/ES)
FIXATION DES
CACHE-BORNES
Fixez les cache-bornes (fournis) après avoir vérifié que
les raccordements ont été correctement effectués et
que l’appareil fonctionne correctement.
La fixation des cache-bornes améliore l’aspect de l’ap-
pareil.
les raccordements ont été correctement effectués et
que l’appareil fonctionne correctement.
La fixation des cache-bornes améliore l’aspect de l’ap-
pareil.
Comment fixer les cache-bornes:
Fixez les cache-bornes gauche et droit à l’aide des vis
(M3 x 12) fournies, comme indiqué dans le schéma ci-
dessous.
Fixez les cache-bornes gauche et droit à l’aide des vis
(M3 x 12) fournies, comme indiqué dans le schéma ci-
dessous.
1 Cache-bornes droit
2 Cache-bornes gauche
3 Vis (M3 x 12)
2 Cache-bornes gauche
3 Vis (M3 x 12)
REMARQUE :
Ne transportez pas et ne soulevez pas l’unité par les
cache-bornes.
Ne transportez pas et ne soulevez pas l’unité par les
cache-bornes.
ATTACHING THE TERMINAL
COVERS
Attach the terminal covers (supplied) after connections
and confirmation of correct operation.
Attaching the terminal covers will improve the appear-
ance of the unit.
and confirmation of correct operation.
Attaching the terminal covers will improve the appear-
ance of the unit.
How to attach the terminal covers:
Attach the left and right terminal covers using the sup-
plied screws (M3 x 12), as shown in the figure below.
Attach the left and right terminal covers using the sup-
plied screws (M3 x 12), as shown in the figure below.
1 Right terminal cover
2 Left terminal cover
3 Screw (M3 x 12)
2 Left terminal cover
3 Screw (M3 x 12)
NOTE:
Do not lift or carry the unit by the attached terminal
covers.
Do not lift or carry the unit by the attached terminal
covers.
FIJACIÓN DE LAS TAPAS DEL
TERMINAL
Fije las tapas del terminal (suministradas) tras realizar
las conexiones y confirmar que la unidad funciona
correctamente.
La fijación de las tapas del terminal mejorará la
apariencia de la unidad.
las conexiones y confirmar que la unidad funciona
correctamente.
La fijación de las tapas del terminal mejorará la
apariencia de la unidad.
Cómo fijar las tapas del terminal:
Fije las tapas izquierda y derecha del terminal con los
tornillos (M3 x 12) suministrados, tal como se indica
en la siguiente figura.
Fije las tapas izquierda y derecha del terminal con los
tornillos (M3 x 12) suministrados, tal como se indica
en la siguiente figura.
1 Tapa derecha del terminal
2 Tapa izquierda del terminal
3 Tornillo (M3 x 12)
2 Tapa izquierda del terminal
3 Tornillo (M3 x 12)
NOTA:
No eleve ni transporte la unidad cogiéndola de las tapas
del terminal.
No eleve ni transporte la unidad cogiéndola de las tapas
del terminal.
2
1
3
3
Fig. 2