Yamaha RX-V2600 Manual De Usuario

Press LEARN using a ballpoint pen or similar 
object.
LEARN and the selected component name (ex. DVD) 
appear alternately in the display window.

• Do not press and hold LEARN. If you hold it down for 

more than 3 seconds, the remote enters the remote control 
code setting mode.

• If you do not complete each of the following steps within 

30 seconds, the learning mode will be automatically 
canceled. In this case, press LEARN again.

Press the button for which you want to 
program the new function.
LEARN appears in the display window.

Press and hold the button you want to 
program on the other remote control until OK 
appears in the display window.
NG appears in the display window if learning was 
unsuccessful. In this case, start over from step 5.

y

• If you want to program another function, repeat steps 5 

and 6.

• If you continuously want to program another function for 

another component, press SELECT k / n to select the 
component and then repeat steps 5 and 6.

• ERROR appears in the display window if you press a button not 

indicated in the respective step, or when you press more than 
one button simultaneously.

• This remote control can learn approximately 200 functions. 

However, depending on the signals learned, FULL may appear 
in the display before you program 200 functions. In this case, 
clear unnecessary programmed functions to make room for 
further learning.

• Learning may not be possible in the following cases:

– When the batteries in the remote control for this unit or other 

components are weak.

– When the distance between the two remote controls is too 

great or too small.

– When the remote control infrared windows are not facing each 

other at the appropriate angle.

– When the remote control is exposed to direct sunlight.
– When the function to be programmed is continuous or 

uncommon.

LEARN

LEARN