Yamaha RX-V2600 Manual De Usuario

■ Video jacks

This unit has four types of video jacks (composite, component, S-video and HDMI). Connection depends on the 
availability of input jacks on your monitor. When Conversion

 

is set to

 

On (see page 81), the analog video signals input at 

the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be output at the VIDEO, S VIDEO and COMPONENT 
VIDEO jacks interchangeably. In addition, when Conversion

 

is set to

 

On (see page 81) and HDMI Up-Scaling is set to 

On (see page 81), the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be 
digitally up-converted and output at the HDMI OUT jack.

VIDEO jacks
For conventional composite video signals.

S VIDEO jacks
For S-video signals, separated into luminance (Y) and 
color (C) video signals to achieve high-quality color 
reproduction.

COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and 
color difference (P

B

, P

R

) to provide the best quality in 

picture reproduction.

HDMI jacks
For HDMI digital video signals.

■ Video signal flow for MONITOR OUT

• The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i (NTSC) or 576i (PAL) to 480p 

(NTSC) or 576p (PAL). Set Component I/P to On in Manual Setup to activate this feature (see page 81).

• The analog video signals input at the COMPONENT VIDEO jacks and output at the S VIDEO or VIDEO jacks cannot be converted to 

480p (NTSC) or 576p (PAL) /1080i/720p.

• The analog video signals output at the HDMI jack can be up-scaled to 480p/1080i/720p.
• When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input 

signals is as follows where the analog video signals input at the COMPONENT VIDEO jacks have the top priority.
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO

Component I/P (see page 81) only when Conversion is set to On (see page 81)

HDMI Up-Scaling (see page 81) only when Conversion is set to On (see page 81)