Yamaha RX-V2600 Manual De Usuario

■ Displaying information about the input 

You can display the type, format and sampling frequency 
of the current input signal.

Set AMP/SOURCE/TV to AMP and then press 
GUI TOP on the remote control.
The top display appears.

Press n repeatedly to select Signal Info. and 
then press h.

Press l / h repeatedly to select Audio Info. 
or Video Info..
The following information appears.

Format
Signal format display. When the unit cannot detect a 
digital signal, it automatically switches to analog 
input.

Sampling
Sampling frequency. When the unit is unable to 
detect the sampling frequency “?” appears.

Channel
Number of source channels in the input signal. For 
example, a multi-channel soundtrack with 3 front 
channels, 2 surround channels and LFE, is displayed 
as “3/2/0.1”.

Bitrate
Bit rate. When the unit is unable to detect the bit rate 
“– – –” appears.

Dialogue
Dialogue normalization information for Dolby 
Digital and DTS signals.

Flag1/Flag2
Flag data encoded in Dolby Digital, DTS and PCM 
signals that cue this unit to automatically switch 
decoders.

HDMI Signal
Type of the HDMI signals input or output at the 
HDMI IN/OUT jacks of this unit.

HDMI Resolution
Resolution of the HDMI signals input or output at the 
HDMI IN/OUT jacks of this unit.

Analog Resolution
Resolution of the analog signals input or output at the 
video component jacks of this unit.