Yamaha RX-V2600 Manual De Usuario

y

If you want to reset all PEQ parameter settings for the 
selected speaker, select RESET and press ENTER.

y

• If you select “Band” in step 3, you can use this menu as a 

graphic equalizer.

• For more information on the parametric equalizer, see page 77.

■ Tone Control (Tone control)

Use to adjust the amount of bass and treble output to your 
speakers and headphones.

Manual Setup > Sound > Tone Control >
Choices: Control, Bass, Treble, Audio Bypass

Tone Control is not effective when:

– THX (see page 65) or PURE DIRECT (see page 64) is 

selected.

– MULTI CH INPUT is selected.

Control (Tone control)
Choices: Speakers, Headphones

• Select “Speakers” to adjust the bass/treble balance of 

your speakers.

• Select “Headphones” to adjust the bass/treble balance 

of your headphones.

Bass (Bass control)
Use this feature to adjust low-frequencies output to your 
speakers or headphones.
Choices: 125Hz, 350Hz, 500Hz (frequency)

–6.0dB to +6.0dB (gain), initial setting: 0.0dB

Treble (Treble control)
Use this feature to adjust high-frequencies output to your 
speakers or headphones.
Choices: 2.5kHz, 3.5kHz, 8.0kHz (frequency)

–6.0dB to +6.0dB (gain), initial setting: 0.0dB

Auto Bypass (Auto bypass)
Use to set this unit to automatically bypass any 
adjustments made for Tone Control.
Choices: Auto, Off

• Select “Auto” to set this unit to automatically bypass 

any Tone Control settings.

• Select “Off” to set this unit to reflect the Tone Control 

settings.

■ Audio Option (Audio options)

Use to customize this unit’s overall audio settings.

Manual Setup > Sound > Audio Option >
Choices: Muting Type, Audio Delay, Max Volume, 

Initial Volume, PR/SB Select

Muting Type (Muting type)
Use to adjust how much the mute function reduces the 
output volume.
Choices: Full, –20dB

• Select “Full” to completely halt all output of sound.
• Select “–20dB” to reduce the current volume by 20 dB.