Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Yamaha
  4. aw1600
  5. Manual De Usuario

Yamaha aw1600 Manual De Usuario

Descargar
Página de 232
Recording on the stereo track
9
Mixdo
wn and bounce oper
ations
87
AW1600  Owner’s Manual
Here’s how to record the final mix on the stereo track.
1
In the Quick Navigate section, repeatedly 
press the [RECORD] key or hold down the 
[RECORD] key and use the CURSOR [
]/
[
] keys to access the MIXDOWN page of 
the RECORD screen.
2
Move the cursor to the REC button of the 
MIXDOWN page, and press the [ENTER] key 
to turn the button on.
The panel [STEREO] key will blink red. This blinking 
indicates that the stereo track is in record-ready mode.
3
Press the RTZ [
] key to rewind the song. 
Then hold down the REC [
●] key and press 
the PLAY [
] key.
The song will begin playing, and the playback will be 
recorded on the stereo track.
4
When you reach the end of the song, move 
the cursor to the SAFE button in the screen 
and press the [ENTER] key.
A popup window will ask you to confirm that you 
want to cancel record-ready mode. Move the cursor to 
the OK button and press the [ENTER] key.
5
To play back the stereo track, repeatedly 
press the Quick Navigate section [MONI-
TOR] key or hold down the [MONITOR] key 
and use the CURSOR [
]/[
] keys to 
access the ST.TRACK page of the MONI-
TOR screen.
1 ST.TRACK ON/OFF button
Switches stereo track playback on/off.
B
Virtual track
Selects the virtual track that is assigned to the stereo 
track. The currently selected virtual track is indicated 
by a “
●.” Of the other virtual tracks, those that have 
already been recorded are indicated by “ ,” and the 
unrecorded tracks are indicated by “–”.
C
Track view
In this area, markers and the presence or absence of 
track data are displayed graphically.
D
PRE/POST buttons
These buttons select whether the level meter in the 
ST.TRACK page will indicate the pre-fader level 
(PRE) or the post-fader level (POST). This setting is 
shared with the BUS page of the VIEW screen.
E
Level meter
This indicates the output level of the stereo track.
6
Switch the ST.TRACK ON/OFF button ON.
When this button is on, the stereo track output will be 
sent to a point directly before the [STEREO] fader, 
and can be monitored from the STEREO/AUX OUT 
jacks or the MONITOR OUT jacks. At this time, the 
record-ready status of all tracks will be cancelled.
7
Press the RTZ [
] key to rewind the song, 
and press the PLAY [
] key.
The stereo track will be played back. Use the [STE-
REO] fader to adjust the monitor level.
When playback ends and you want to move to a differ-
ent screen, switch the ST.TRACK ON/OFF button 
OFF.
8
Save the song.
If the song is not saved after it has been recorded as a 
stereo track, it cannot be selected for burning to a CD.
Recording on the stereo track
• The data that is recorded here on the stereo track will be the 
data that is used to create an audio CD. If you want to pre-
cisely specify the beginning or end of the song, it is conve-
nient to use Auto Punch-in/out (
HINT
5
4
1
3
2
• Even while the stereo track is playing, you can still monitor the 
signals from the input channels.
HINT
• EQ and dynamics processing are applied to the playback of 
the stereo track.
NOTE
• If desired, you can use the [UNDO/REDO] button to cancel 
the recording that was made on the stereo track (
use the ST.TRACK page to switch virtual tracks and record 
another take (
HINT