Crestron electronic SRD-ANT-4-PAK Manual De Usuario
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
Important Safety Instructions
• Read and Retain Instructions – Read all Instructions before
operating equipment and save for future reference.
• Outdoor Antenna Grounding – The antenna and coaxial cable
connecting to the unit should be properly grounded to provide
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
• Power Lines – An outside antenna system should not be located in
the vicinity of overhead power lines or electric light or power circuits,
or where they can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits, as contact with them
might be fatal.
or where they can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits, as contact with them
might be fatal.
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.