Meridian America 504 Manual De Usuario
Using the FM tuner
9
Selecting a station
During normal use the FM tuner should be left in the standby
state. This uses a negligible amount of electricity, but ensures
that the components of the FM tuner operate at maximum
efficiency from the moment you start listening to a station.
If you are not going to use the FM tuner for a period of several
days you should switch the unit completely off, at the back
panel, and disconnect it from the AC power supply.
To switch on from standby
●
Press
[ (Previous) or ] (Next).
●
Switch on any other equipment connected to the FM tuner
which is not part of the Meridian 500 Series.
To select a preset station
●
Press
[ (Previous) or ] (Next) until the display shows the
station you want to listen to, or type the number of the preset
(remote only).
For example, for Radio 3
the display will show:
Radio 3
●
Keeping either key held down will step through the preset
stations in turn.
Note that before using the FM tuner for the first time you may
To switch to standby
●
Press Off.
The display will show:
.
If you have other Meridian 500 Series equipment connected to
the FM tuner, these units will also switch to standby.