Sony SDP-E800 Manual De Usuario

4

Check that you received the following items with the
processor:
• Remote commander (remote)  (1)
• Size AA (R6) batteries  (2)
• Connecting cords  (3)

Insert two size AA (R6) batteries with the + and – on
the battery compartment. When using the remote,
point it at the remote sensor g on the processor.

z

Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
processor, replace both batteries with new ones.

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from
battery leakage and corrosion.

• Do not connect the power cord to the mains or press

the POWER switch before completing all
connections.

• The cable connectors should be fully inserted into the

jacks. Loose connection may cause hum and noise.

The surround processor allows you to connect up to 3
digital audio (video) source components, such as a
DVD player, LD player (with AC-3 RF output) and CD
player (etc.). You can also connect 1 analog source
component, such as a VCR.

What cords will I need?
• Optical digital connecting cord (not supplied)

• Coaxial digital connecting cord (not supplied)

• Video cable (not supplied)

• Audio/video cable (not supplied)

Make sure to match the colour of the plugs and the jacks:
• Yellow jacks and plugs: Video signal
• Red jacks and plugs: Right audio channel
• White jacks and plugs: Left audio channel

a DIGITAL 1

b DIGITAL 2

c DIGITAL 3

d ANALOG

]

}

]

}