Sony DA6400ES Manual De Usuario
66
GB
Enter the frequency of a station directly by
using the numeric buttons.
using the numeric buttons.
1
Press AMP.
The receiver can be operated using the
remote.
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press
V/v repeatedly to select
“
FM” or “
AM,” then press
or
b.
4
Press
V/v to select “Direct
Tuning,” then press
.
5
Press SHIFT, then press the
numeric buttons to enter the
frequency, then press
numeric buttons to enter the
frequency, then press
.
Example 1: FM 102.50 MHz
Select 1
Select 1
b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1
Select 1
b 3 b 5 b 0
Tip
If you have tuned in an AM station, adjust the
direction of the AM loop antenna (aerial) for
optimum reception.
direction of the AM loop antenna (aerial) for
optimum reception.
If you cannot tune in a station
“– – – .– – MHz” appears and then the display
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 5. If you still
cannot tune in a station, the frequency is not
used in your area.
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 5. If you still
cannot tune in a station, the frequency is not
used in your area.
You can change the AM tuning scale to either
9 kHz or 10 kHz on the receiver.
9 kHz or 10 kHz on the receiver.
1
Press POWER to turn off the
receiver.
receiver.
2
While holding down TUNING
MODE, press POWER on the
receiver.
MODE, press POWER on the
receiver.
3
Change the current AM tuning
scale to 9 kHz (or 10 kHz).
scale to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
repeat the procedure above.
Note
All preset stations will be erased when you change
the tuning scale.
the tuning scale.
Tuning into a station directly
(Direct Tuning)
(Direct Tuning)
Changing the AM tuning scale
POWER
TUNING MODE