Sony MDS-E10 Manual De Usuario
42
Editing Recor
ded MDs
Erasing all tracks on an MD (ALL ERASE)
All tracks on the MD and the all name are erased.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./> repeatedly) until “All
Erase?” appears, then press AMS or YES.
“All Erase??” appears in the display.
Erase?” appears, then press AMS or YES.
“All Erase??” appears in the display.
3
Press AMS or YES.
“Complete!” appears for a few seconds and all the
track names and disc name are erased.
“Complete!” appears for a few seconds and all the
track names and disc name are erased.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.
Erasing a portion of a track (A-B Erase)
You can easily erase a portion of a track by specifying the
starting and ending points of the erasure. This is
convenient for erasing the unwanted portions of
recordings of satellite or FM broadcasts.
starting and ending points of the erasure. This is
convenient for erasing the unwanted portions of
recordings of satellite or FM broadcasts.
Example: Erasing portion “B2” of the second
track
AAA
BBB
B1
B3
B2
CCC
1
2
3
AAA
B1
B3
CCC
1
2
3
BBB
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./> repeatedly) until “A-B
Erase?” appears in the display; press AMS or YES.
Erase?” appears in the display; press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until the
number of the track containing the portion to be
erased appears, then press AMS or YES.
“-Rehearsal-“ and “Point A ok?” alternate in the
display and the recorder repeatedly plays the portion
of the track from the point where AMS or YES was
pressed.
number of the track containing the portion to be
erased appears, then press AMS or YES.
“-Rehearsal-“ and “Point A ok?” alternate in the
display and the recorder repeatedly plays the portion
of the track from the point where AMS or YES was
pressed.
4
While monitoring the sound, turn AMS (or press
.
.
/> repeatedly) to locate the starting point of
the portion to be erased (point A).
The position is moved one frame* (f) at a time (one
frame = 1/86 sec.).
* Monaural tracks or tracks recorded in LP2 stereo
The position is moved one frame* (f) at a time (one
frame = 1/86 sec.).
* Monaural tracks or tracks recorded in LP2 stereo
move two frames at a time; LP4 stereo tracks move
four frames at a time.
four frames at a time.
To quickly choose point A
Press m/M in step 4 repeatedly to select frame,
second or minute. The selected unit flashes in the
display.
Press m/M in step 4 repeatedly to select frame,
second or minute. The selected unit flashes in the
display.
5
Repeat step 4 until point A plays properly
6
Press AMS or YES to enter point A
“Point B set” appears, and playback from point A
begins.
“Point B set” appears, and playback from point A
begins.
7
Continue playing the track or press M to locate
the ending point of the portion to be erased (point
B), then press AMS or YES.
“A-B Ers” and “Point B ok?” alternate in the display
and a few seconds of the track before point A and after
point B play back repeatedly.
the ending point of the portion to be erased (point
B), then press AMS or YES.
“A-B Ers” and “Point B ok?” alternate in the display
and a few seconds of the track before point A and after
point B play back repeatedly.
8
Repeat step 4 until B has been correctly located
9
Press AMS or YES to enter point B
“Complete!” appears for a few seconds, and the
portion between A and B is erased.
“Complete!” appears for a few seconds, and the
portion between A and B is erased.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.
Note
When “Impossible” is displayed, the portion of the track
cannot be erased.
After repeated editing of a track, it may become impossible
to erase a portion of the track any further. This is a
technical limitation of the MD system, and is not a
mechanical error.
When “Impossible” is displayed, the portion of the track
cannot be erased.
After repeated editing of a track, it may become impossible
to erase a portion of the track any further. This is a
technical limitation of the MD system, and is not a
mechanical error.
Erasing consecutive tracks (Multitrack
Erase)
Erase)
Consecutive tracks can be specified to be deleted at one
time.
time.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./> repeatedly) until “M-Tr
Erase?” appears in the display; press AMS or YES.
Erase?” appears in the display; press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until the
number of the first track to be erased appears, then
press AMS or YES.
number of the first track to be erased appears, then
press AMS or YES.
4
Turn AMS (or press ./> repeatedly) until the
number of the last track to be erased appears, then
press AMS or YES.
“M-Tr Ers OK?” appears with the numbers of the first
( ) and last (#) tracks also appearing as “ - #
number of the last track to be erased appears, then
press AMS or YES.
“M-Tr Ers OK?” appears with the numbers of the first
( ) and last (#) tracks also appearing as “ - #
→
Ers”.
5
Press AMS or YES
“Complete!” appears for a few seconds, and the tracks
selected in steps 3 and 4 are erased.
“Complete!” appears for a few seconds, and the tracks
selected in steps 3 and 4 are erased.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.