Sony HT-DDW900 Manual De Usuario

E:\SEM_soowan(film)\J9050000_2662263112DDW900_US\2662263112\US05AMP_HT-
DDW900-U.fm

HT-DDW900

2-662-263-11 (2)

Press TUNING + to scan from low to 
high; press TUNING – to scan from high 
to low.
The receiver stops scanning whenever a 
station is received.

Turn INPUT SELECTOR to select the FM 
or AM band.

Press TUNING MODE repeatedly to select 
“AUTO T.”.

Press TUNING + or TUNING –.

If the FM stereo reception is poor and 
“STEREO” flashes on the display, select 
monaural audio so that the sound will be less 
distorted.
Press FM MODE repeatedly until the 
“MONO” indicator lights up on the display. 
To return to stereo mode, press FM MODE 
repeatedly until the “MONO” indicator on the 
display do not light up.

Enter the frequency of a station directly by 
using the numeric buttons.

You can also use INPUT SELECTOR on 
the receiver.

Example 1: FM 102.50 MHz
Select 1 

b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz
Select 1 

b 3 b 5 b 0

If you have tuned in an AM station, adjust 
the direction of the AM loop antenna for 
optimum reception.

You can also use MEMORY/ENTER on 
the receiver.

Make sure you have entered the right 
frequency. If not, repeat steps 2 to 4. If you still 
cannot tune in a station, the frequency is not 
used in your area.

.

>

FM MODE

m

M

.

>

-

US01COV_HT-DDW900-U.book  Page 53  Thursday, December 15, 2005  4:08 PM