JVC TH-C20 Manual De Usuario

Note that the illustration below is for SP-PWC30.

• If you connect speakers other than the supplied ones, use speakers of 

the same speaker impedance (SPEAKER IMPEDANCE) indicated 
near the speaker terminals on the rear of the powered subwoofer.

• DO NOT connect more than one speaker to one speaker terminal.
• When installing the satellite speakers on the wall;

– Be sure to have them installed on the wall by qualified personnel.

DO NOT install the satellite speakers on the wall by yourself to 
avoid unexpected damage from falling off the wall due to incorrect 
installation or weakness in wall structure.

– Care must be taken in selecting a location for speaker installation 

on a wall. Injury to personnel or damage to equipment may result 
if the speakers installed interfere with daily activities.

Precautions for daily use
• When moving the speakers, do not pull the speaker cords; 

otherwise, the speakers may fall over, causing damage or injury.

• Do not reproduce sounds at so high a volume that the sound is 

distorted; otherwise, the speakers may be damaged by internal 
heat buildup.

• Connect the black cords to the black (r) terminals.
• Connect the white cords to the (q) terminals 

referring to the table below:

Speaker cord

FRONT SPEAKERS (LEFT)

White

FRONT SPEAKERS (RIGHT)

Red

CENTER SPEAKER

Green

SURROUND SPEAKERS (LEFT)

Blue

SURROUND SPEAKERS (RIGHT)

Gray

Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.

Powered subwoofer
TH-C30: SP-PWC30
TH-C20: SP-PWC20

Front speakers

TH-C30: SP-THC40F
TH-C20: SP-THC20F

Surround speakers
TH-C30: SP-THC40S
TH-C20: SP-THC20S

Center speaker

TH-C30: SP-THC40C
TH-C20: SP-THC20C

Do not connect the power cord until all other connections have been made.

TH-C20-30[JC]5.book  Page 9  Thursday, January 12, 2006  11:29 AM