Renesas SH7709S Manual De Usuario
Rev. 5.00, 09/03, page 80 of 760
Figure 3.13 shows the MMU exception signals in the data access mode.
IF
ID
EX
IF
ID
EX
IF
ID
ID
EX
MA
WB
ID
EX
MA
WB
ID
EX
MA WB
NOP
NOP
IF
ID
EX
MA WB
: Exception source stage
: Stage cancellation for instruction
that has begun execution
that has begun execution
IF
ID
EX
MA
WB
NOP
= Instruction fetch
= Instruction decode
= Instruction execution
= Memory access
= Write back
= No operation
= Instruction decode
= Instruction execution
= Memory access
= Write back
= No operation
MMU exception handler
Handler transition
processing
processing
MA
WB
MA
WB
EX
MA
WB
Figure 3.13 MMU Exception Signals in Data Access
3.6
Configuration of Memory-Mapped TLB
To allow the management of TLB operations by software, the MOV instruction can be used, in the
privileged mode, to read and write TLB contents. The TLB is mapped to the P4 area of the virtual
address space. The TLB address array (VPN, V bit, and ASID) is mapped to H'F2000000 to
H'F2FFFFFF, and the TLB data array (PPN, PR, SZ, CD, S, and H bits) is mapped to H'F3000000
to H'F3FFFFFF. It is also possible to access the V bits in the address array from the data array.
Only longword access is possible, for both the address and data arrays.
privileged mode, to read and write TLB contents. The TLB is mapped to the P4 area of the virtual
address space. The TLB address array (VPN, V bit, and ASID) is mapped to H'F2000000 to
H'F2FFFFFF, and the TLB data array (PPN, PR, SZ, CD, S, and H bits) is mapped to H'F3000000
to H'F3FFFFFF. It is also possible to access the V bits in the address array from the data array.
Only longword access is possible, for both the address and data arrays.
3.6.1
Address Array
The address array is mapped to H'F2000000 to H'F2FFFFFF. To access the address array, the 32-
bit address field (for read/write access) and 32-bit data field (for write access) must be specified.
The address field has the information that selects the entry to be accessed; the data field specifies
the VPN, the V bit, and the ASID to be written to the address array (figure 3.14 (1)).
bit address field (for read/write access) and 32-bit data field (for write access) must be specified.
The address field has the information that selects the entry to be accessed; the data field specifies
the VPN, the V bit, and the ASID to be written to the address array (figure 3.14 (1)).