Philips FW-C355 Manual De Usuario

English

3139 115 21381

Demonstration mode

The system has a demonstration mode that
shows the various features offered by the system.

To activate the demonstration

● In standby mode, press and holdÇon the

system until "

WELCOME" is displayed.

➜ The demonstration will begin.

To deactivate the demonstration

● Press and holdÇon the system until

DEMO OFF" is displayed.

➜ The system will switch to standby mode.

Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.

Switching the system on

In standby/demonstration mode

● Press STANDBY ON to switch on the last

selected source.

● Press CD 1/2/3, TUNER, TAPE (TAPE 1/2)

AUX (AUX/CDR).

● Press OPEN/CLOSE.

➜ The system will switch to CD mode.

Switching the system to standby
mode

In demonstration mode

● Press and hold Ç on the system.

In any other source mode

● Press STANDBY ON (or B on the remote

control).
➜ The clock will appear on the display when the
system is in standby mode.

Dim mode

You can select the desired brightness for the
display.

● In any source mode (except standby mode),

press

DIM repeatedly to select : DIM 1, DIM 2,

DIM 3 or DIM OFF display mode.
➜

DIM

is shown, except for DIM OFF mode.

DIM
mode

OFF

Brightness

normal

half

normal

Spectrum
Analyser

off

Note:
– In standby mode, pressing DIM to select half or
full brightness for clock display.

Volume control

Adjust

MASTER VOLUME (or press VOL +

or - on the remote control) to increase or
decrease the volume level.

To listen through the headphones

● Connect the headphones plug to

the n socket at the front of the
system.
➜ The speakers will be muted.

To switch off the volume temporarily

● Press MUTE on the remote control.

➜ Playback will continue without sound and
"

MUTE" is displayed.

● To restore the volume, press MUTE again or

increase the volume level.

Basic Functions

MIC

pg 001-029/C355/21-Eng

12/24/01, 11:17 AM