Panasonic SC-PM71SD Manual De Usuario

Descargar
Página de 44
R
Q
T
804
6
28
Editing SDs
Preparation
1 Insert the SD card. (⇒ page 8)
• Securely close the lid of the SD card slot. You cannot edit if the lid is 
open.
2 Press [q/h SD] and then [g STOP] to select “SD” as the source.
To stop partway 
Press [g STOP].
Note
• Do not open the SD card lid while editing as the operation in progress 
stops and the editing is not completed properly.
If you accidentally open the cover when editing an SD card, reinsert the 
card and check what you have edited. If there is a problem, delete what 
was edited, then do the editing again.
• You can use SD cards with capacities between 8MB and 1GB on this 
unit. (⇒ page 6)
1
During stop or play
Select “TRACK ERASE?”.
Every time you press the button:
2
Press [LIST/ENTER].
3
Press [u 2/REW, i 1/FF] to select the track to 
erase and press [LIST/ENTER].
• Repeat this step to select other tracks (up to 24 tracks).
• During play, the current track is selected.
4
Press [LIST/ENTER].
When “CARD Writing” stops flashing editing is complete.
All the SD-Audio tracks on the card are erased.
1
During stop
Select “ALL ERASE?”.
Every time you press the button:
2
Press [LIST/ENTER].
3
Press [LIST/ENTER].
• When “CARD Writing” stops flashing editing is complete. 
• If you erase all the tracks, “NO TRACK” is displayed.
• Editing SDs may take time when erasing a lot of tracks at one time 
or when erasing tracks in multiple playlists.
1
During stop or play
Select “MOVE?”.
Every time you press the button:
2
Press [LIST/ENTER].
3
Press [u 2/REW, i 1/FF] to select the track to 
be moved and press [LIST/ENTER].
During play, the current track is selected.
4
Press [u 2/REW, i 1/FF] to select the new 
position and press [LIST/ENTER].
5
Press [LIST/ENTER].
When “CARD Writing” stops flashing editing is complete.
Erasing tracks — TRACK ERASE/ALL ERASE
TRACK ERASE
ALL ERASE
Moving tracks — MOVE
Edi
ting