Anchor Audio AN-130F1+ Manual De Usuario

MADE IN USA

SIX YEAR WARRANTY

AN-130+ Speaker Monitor Owners Manual

BACK PANEL OF AN-130F1+

BASIC SYSTEM OPERATION

IMPORTANT:  To avoid feedback, do not position  

a microphone in front of  speaker.

The AN-130+ monitor is used to amplify the signal 
from a microphone, electronic musical instrument or 
line-level sources 

(MP3, iPod, CD, VCR, etc).  

You’ll need a connection cable and an AC outlet.

1.  Place the AN-130+ in desired location
2.  Set volume control on front of speaker to 

minimum

3.  Plug the power cord into a grounded 115 volt 

outlet 
(220 volt outlet for export model)

4.  Plug a microphone into the MIC input jack, or an 

audio source into a LINE IN jack

5.  Turn the power switch on the rear panel “ON”  

(red LED on front panel should light)

6.  Adjust the volume, bass & treble controls to 

desired levels

NOTE:  SEE PAGE 4  

FOR WIRELESS RECEIVER 

INSTRUCTIONS

MIC IN
An unbalanced, low impedance 
microphone input is for use with the 
MIC-90P or other mics that have a 1/4” 
phone plug.

LINE IN
The line-level input jacks may be used with audio sources such as computers, 
iPods or portable audio players.  

LINE OUT
The unbalanced Line-out provides a combined signal of all inputs being used. 
You can use this function to record your presentation or to “daisy chain” another 
powered sound system to the AN-130+ for greater crowd coverage.
Note: 

This output is post source level; any volume fluctuations for a specific input 

will affect the output signal level at this output.

POWER SWITCH

POWER CORD