Philips LX3750 Manual De Usuario

The AD905W accessory gives you the option for wireless
speaker connection.
Please check you have all the supplied parts for your
AD905W wireless set:

– 1 x AD905WT 

– 1 x AD905WA 

– 1 x 14V adapter
– 1 x table stand

Remove the PHILIPS cover from the AD905WA 

 as shown in Fig. 1, to access the connection

terminal. Connect your rear speaker terminals with the
corresponding color terminals on the AD905WA

Insert the table stand into the brackets as shown in Fig.2.

Connect the AD905WA 

 power cord

to your power supply.

Check / adjust the AD905WA 

 OFF-

ON switch to the ON position (see Fig.1).
➜ The AD905WA 

 power indicator

lights up green.

Connect the 14V power adapter to the AD905WT

 and power supply as shown in Fig.

3.

Make sure you position both the AD905WT 

 and AD905WA 

 at least

2 meters apart.

Connect and carefully match the AD905WT 

 inputs to the corresponding surround

speaker jacks on your LX3750W DVD system.
➜ The AD905WT 

 power

indicator lights up red.

Check and adjust the 4-channel toggle switch on the
AD905WT 

 and AD905WA

 (CHANNEL SELECTOR switch),

so that both units are using the same channel.

On your LX3750W DVD system, play an audio source
and activate the surround sound mode option. Adjust the
volume to reproduce surround sound in the rear speakers.

10 Extend the antenna vertically on both the AD905WT

 and AD905WA 

 to improve reception. Check the antennas are

safely positioned without obstruction.

● Place both the AD905WT 

 and

1

2

3

 off the ground

(recommended minimum height of 30cm).

● Avoid placing the AD905WT 

 too

close to your DVD receiver, AC power adapter, TV or other
electrical equipment as it may cause electrical interference.

● In case of sound distortion, please select another channel

for both the AD905WA 

 and

. The distortion could

be the result of interference caused by other equipment
using same frequency channel in your house or
neighbourhood.