Samsung HWF750ZA Manual De Usuario

connections

attacHing tHe tOrOiDaL ferrite cOre tO tHe POWer cOrD 
Of tHe sUBWOOfer

Attaching the Toroidal ferrite core to the power cord of the subwoofer helps 
prevent RF interference from radio signals.

1.  Pull the fixing tab of the Toroidal ferrite core to open it. 
2.  Make two loops around the core with the power cable of the subwoofer.
3.  Attach the Toroidal ferrite core to the Subwoofer power cord as the figure 

shows and press it until it clicks.

LOOPing tHe POWer caBLe arOUnD tHe tOrOiDaL cOre

Lift up to release the 

lock and open the core.

Make two loops around the core 

with the power cable. (Start 

winding 5-10cm (12.75 - 25.5 

in.) away from the core).

Close the lock.

aUtO sOUnD caLiBratiOn

For your best sound experience, ASC provides re-positioning and calibrating Air Track and sound devices 
including the Sub Woofer, by automatically adjusting sound balance considering the distance between devices 
and frequency characteristics.

1.  Place the ASC Microphone at the listening position.

•  You should place the ASC Microphone at the actual listening 

location first, and then connect the ASC Microphone to the 
asc in jack on the Air Track for precise calibration

2.   Connect the ASC Microphone into the asc in jack on the Air 

track. The Calibration starts automatically and it may take 
about 2 minutes.

•  If you turn off the Air Track or unplug the ASC microphone 

before the completion message appears on the display, 
calibration will be cancelled and incomplete. In such a case, 
plug the ASC microphone into the ASC IN jack again.

•  When the Calibration completes, you can choose the ASC 

mode by pressing the sound effect button on the remote 
control.

  

 

During the ASC calibration, all other buttons do not work except the power button.

 

ASC will abort with error if you change the set’s position in the middle of ASC calibration.

asc 

microphone