Lexicon DC-2 Manual De Usuario

23

DC-2 Digital Controller

System

Configuration

Select LARGE for full-range front speakers to deliver full frequency re-
sponse to the front left and right outputs. Selecting SMALL activates a 12dB
per octave highpass filter and automatically routes low frequency informa-
tion to the subwoofer output. Choices of 40, 80 and 120 Hz are available for
the -3dB point. The SMALL setting is recommended unless your speakers
are capable of handling full audio signals, or are equipped with their own
crossovers.

This menu item assigns the status for the programmable (PGM) trigger on
the DC-2 rear panel.  +12VDC is provided for controlling ancillary equip-
ment or functions. Selections are ENABLE or DISABLE for the selected
input. The factory default is ENABLE (high) for A/V inputs and DISABLE
(low) for audio only inputs. (+5VDC is available via internal jumper.
Contact your dealer or Lexicon Customer Service to perform this change.)

The Speaker Configuration menu allows a wide range of choices in speaker
type and room setups to provide optimal performance in almost any room.
An adjustable lowpass filter is available for the subwoofer, as well as a
highpass filter for all other speakers. The three selections are for CUSTOM,
THX or SURROUND EX configuration.

▲

▼

Adjust with        or

Press SELECT to open the CUSTOM CONFIG menu. Press SELECT to
access the selections for any highlighted menu item.

dBr

Hz