Bluetrek X2 Manual De Usuario

PAGE 3 / 6 

-  You must charge it continuously for about 8 hours, until the red indicator light 

turns off. Please refer to the “Charging the BLUETREK® X2” section of this 
manual. 

-  Pair the headset with a mobile phone. Please refer to the “Pairing the 

BLUETREK® X2” section of this manual. 

 

 
The BLUETREK® X2 headset is a wireless headset based on the Bluetooth® 
technology. It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-
free profile. 
 
The BLUETREK® X2 headset has 3 buttons: 

•  “TALK “button (main button), 

•   1 “VOL+ “button, 

• 1 

“VOL- 

“button. 

 
 

Please connect the charger to the headset and to the mains. During the charge, the 
indicator light is red.  The indicator light will turn off when the charge is complete. During 
subsequent charges, the charging should take approximately 2 hour 40 minutes. 
 
When you hear a light beep in your headset at regular intervals, and the indicator light 
flashes in red, your headset needs to be recharged. 
 
Important: 

•  To maximize battery lifetime, it is recommended to recharge your headset to full 

capacity only when the battery is low, since a battery has a lifetime of about 500 
charging cycles. 

 

• 

If you leave your headset battery empty for an extended period of time, it could 
excessively discharge the battery. In this case, charge your headset for 10 hours 
or more until the battery recovers and recharges completely. Only switch on the 
headset once the red indicator light turns off, indicating the battery has fully 
recovered.

 

•  Do not let the battery charger remain plugged in the headset for more than 24h. 

 

 
•  The use of any other charger will automatically suspend the warranty. 

 
 

 
Before using the BLUETREK® X2 headset, you must pair it with your Bluetooth® mobile 
phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can 
communicate.