Eclipse - Fujitsu Ten CD5441 Manual De Usuario
67
How to use an optional NOB remote control
◆
How to use an optional NOB
remote control
■ Turning the power on/off
When the power is turned on, the state used when the power
was turned off such as CD and tuner playing is restored.
was turned off such as CD and tuner playing is restored.
1 .
Press the [PWR] button.
The power turns on or off each time the button is pressed.
When the main unit is shut down, the remote control will not work.
■ Adjusting the audio volume
1 .
Press the [AUDIO CONTROL] button, and turn
it to the left or right.
it to the left or right.
Each press of the button will switch the audio control
modes.
Turn to the right: Increases the volume.
Turn to the left : Decreases the volume.
modes.
Turn to the right: Increases the volume.
Turn to the left : Decreases the volume.
▼
▼Cutting the volume instantly (muting):
Press the [MUTE] button for more than two seconds to cut
the volume or restore it instantly.
the volume or restore it instantly.
Press the [MUTE] button for more than two seconds if E-
COM is connected and less than two seconds if E-COM is
not connected to cut the volume or restore it instantly.
COM is connected and less than two seconds if E-COM is
not connected to cut the volume or restore it instantly.
・
DISC
BAND
MODE
MUTE
ILLUMI
PWR
E-COM
TRACK
TUNE SEEK
・
PU
SH-MOD
E
[PWR] button
[MUTE] button
Remote-control
light receptor
light receptor
[AUDIO
CONTROL]
button
CONTROL]
button