Eclipse - Fujitsu Ten CD5441 Manual De Usuario

If you have a question:

■ Displayed information 

The information listed in the chart below is displayed to show
the status of the tape player and CD changer.  Refer to the
chart for the appropriate action.

Information Code Table

When "INFO

" flashes on the indicator

Nos.2~7 are displayed.

Information Contents

Explanation and remedial action to take

2 NO DISC LOADED IN 

There is no disc in the magazine or player. Load 

THE MAGAZINE

a disc in the magazine. (Load a music disc.)

3 DISCS ARE DIRTY OR 

The loaded disc is dirty or upside down. Check 

DAMAGED

it for proper orientation and verify it is clean.

5 CD CHANGER FAILS 

•The CD changer is inoperative for some reason.

MECHANICALLY

Go through the magazine removal procedure.

•If a magazine fails to eject, have your dealer fix 

the problem.

6 WHEN THE CD CHANGER  

•The temperature in the CD changer is too high for

INTERNAL TEMPERATURE IS 

operation. Wait till it cools down.

HIGH (TO PROTECT PICKUP  •Resume playing after the “High temperature sensed 
UNIT)

and CD stopped" display disappears.  If the CD still
cannot play, have your dealer repair it.

7 AN INTERNAL POWER 

•Turn the ACC off once before turning it on once

SUPPLY FAILURE IS 

again to resume the operation.

OCCURRING WITH THE 

•If the function still cannot be restricted, contact your 

AUTO CHANGER

dealer.

Information Contents

Explanation and remedial action to take

LOAD

CD changer is in the process of verifying the
presence of CDs after a magazine has been
inserted into the CD changer.

DATA FULL

Indicates that additional title entry has been
attempted when the title memory (maximum
capacity: 30

∼100titles) of CDs is full.