JVC LVT1311-003A Manual De Usuario
54
ENGLISH
Symptoms
Causes
Remedies
General
• Sound cannot be heard
from the speakers.
The volume level is set to the
minimum level.
minimum level.
Adjust it to the optimum
level.
level.
Connections are incorrect.
Check the cords and
connections.
connections.
• The receiver does not work
at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
may have functioned
incorrectly due to noise, etc.
Reset the receiver (see page
2).
2).
• “Connect Error” appears on
the display.
The control panel is not
attached correctly.
attached correctly.
Remove the control panel,
wipe the connector, then
attach it again (see pages 42
and 49).
wipe the connector, then
attach it again (see pages 42
and 49).
• “Push Reset” appears on
the display and the control
panel movement is freezed.
panel movement is freezed.
Something is blocking the
control panel movement.
control panel movement.
Reset the receiver (see page
2). If this does not work,
check the installation.
2). If this does not work,
check the installation.
FM/AM
• SSM automatic presetting
does not work.
Signals are too weak.
Store stations manually.
• Static noise while listening
to the radio.
The aerial is not connected
firmly.
firmly.
Connect the aerial firmly.
• “No Text” appears on the
display.
The station does not support
RDS RT or the reception is
weak.
RDS RT or the reception is
weak.
Check the Network-Tracking
Reception (see page 16).
Reception (see page 16).
• “Loading” does not
disappear.
The receiving signal is
temporarily too weak to
receive a complete message
although the service is
available.
temporarily too weak to
receive a complete message
although the service is
available.
Check the Network-Tracking
Reception (see page 16).
Reception (see page 16).
Disc playback
• CD-R/CD-RW cannot be
played back.
• Tracks on the CD-R/
CD-RW cannot be skipped.
CD-R/CD-RW is not
finalized.
finalized.
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
you used for recording.
• Disc cannot be ejected.
Disc is locked.
Unlock the disc (see page 23).
• Disc cannot be recognized
(“No Disc,” “Loading
Error,” or “Eject Error”
flashes).
Error,” or “Eject Error”
flashes).
The CD player may have
functioned incorrectly.
functioned incorrectly.
Eject the disc forcibly (see
page 4).
page 4).
• Disc sound is sometimes
interrupted.
You are driving on rough
roads.
roads.
Stop playback while driving
on rough roads.
on rough roads.
Disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and
connections.
connections.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
center.
EN54-57_KD-SHX751[EX_EU]5.indd 54
EN54-57_KD-SHX751[EX_EU]5.indd 54
05.2.10 4:34:11 PM
05.2.10 4:34:11 PM