JVC KW-AVX 700 Manual De Usuario

ENGLISH

51

•  By pressing SOURCE on the unit, you can 

also turn on the power. If the source is ready, 
playback starts.

•  If you change the aspect ratio to “Just,” both 

sides of the picture are extended horizontally 
to fit the picture to the monitor size. It may 
cause the center portion of the picture to look 
distorted.

•  When SSM is over, received stations are 

preset in No. 1 (lowest frequency) to No. 6 
(highest frequency).

•  In this manual, words “track” and “file” are 

interchangeably used.

•  This unit can also play back 8 cm discs.
•  This unit can only play back audio CD 

(CD-DA) files if different type of files are 
recorded in the same disc.

•  This unit can display only one-byte 

characters. No other characters can be 
correctly displayed.

•  When a disc is inserted upside down, “Disc 

Error Please Eject” appears on the monitor. 
Eject the disc.

•  If the ejected disc is not removed within 

15 seconds, the disc is automatically inserted 
again into the loading slot to protect it from 
dust. (Disc will not play this time.)

•  Normally, Standby Reception indicators light 

up instead of the speaker/signal indicators.

•  The speaker indicators—squares around “L,” 

“R,” “LS,” and “RS” lights in light blue, when 
the corresponding speakers are set to “Large” 
or “Small” (☞ page 45).

•  The center speaker indicator—square around  

“C” lights in light blue, when the center 
speaker is set to “Large” or “Small” and when 
surround is activated.

•  Sounds come out of the speakers whose 

speaker indicators are lit on the monitor.

•  The SW indicator lights up when “Sub 

Woofer” is set to “On” (☞ page 45).

•  The signal indicators indicate the incoming 

signals—L (front left) / R (front right) / C 
(center) / LFE (low frequency effect) / LS (left 
surround) / RS (right surround) / S (monaural 
surround).

•  If the speaker is activated, but the signals 

corresponding to the speaker are not coming 
in, the signal indicators changes their color 
from white to black to indicate no signals 
coming in (therefore no sound comes through 
the corresponding speakers).

•  If you change the source with Dual Zone 

deactivated, playback also stops without 
ejecting the disc.

  Next time you select “DISC” for the playback 

source, disc play starts from where it has been 
stopped previously.

Speaker indicators

Signal indicators

EN50-54_KW-AVX700E_f.indd   51

EN50-54_KW-AVX700E_f.indd   51

06.2.16   9:41:55 PM

06.2.16   9:41:55 PM