JVC GET0191-001A Manual De Usuario
10
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
Auto search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching for a station.
When a station is received, searching stops.
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
broadcast with sufficient signal strength.
To search for stations
of higher frequencies
of higher frequencies
To search for stations of lower frequencies
To stop searching before a station is
received, press the same button you have
pressed for searching.
received, press the same button you have
pressed for searching.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
Searching for a station manually:
Manual search
Manual search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold
¢
or
4
until “M” (manual) starts flashing on
the display.
the display.
FM1
FM2
FM3
AM
FM1
FM2
FM3
AM
EN10-12_KD-SC607[EE]f.p65
11/27/03, 12:17 PM
10