Pioneer P4500MP Manual De Usuario

Listening to the radio

2 3

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

1 Band indicator

Shows which band the radio is tuned to, AM

or FM.

2 Frequency indicator

Shows to which frequency the tuner is

tuned.

3 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

4 Preset number indicator

Shows what preset has been selected.

1 Press SOURCE to select the tuner.

Press SOURCE until tuner is selected as the

source.

2 Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FMor AM.

4 To performmanual tuning, press c or

d with quick presses.

The frequencies move up or down step by

step.

5 To performseek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either
c or d with a quick press.
# If you press and hold c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.

Note

When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.

Tuner

Section

HHHHHHHHHHHHHH