Philips CEM3100 Manual De Usuario
10 EN
7
Reconnect the negative terminal of the car
battery.
Attach the front panel
1
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Turn on
To turn on the unit,
• Press .
To turn off the unit,
• press and hold until the unit is
turned off.
Set clock
1
Press MENU repeatedly until current time
is flashed.
2
Rotate to set hour.
3
Press to confirm.
4
Rotate to set minute.
5
Press to confirm.
Set clock format
1
1
Press MENU.
2
Press or repeatedly until [CLOCK
FORMAT] is displayed.
3
Rotate to select a setting:
• [CLOCK 12H]
• [CLOCK 24H]