Toshiba MEGF60 Manual De Usuario
30
W
elcome
Getting Read
y
Using the Pr
oduct
Other Helpful Inf
ormation
When the AC adapter is connected to the gigabeat, charging starts automatically.
If you are using the gigabeat for the first time after purchase, or when the
gigabeat hasn't been used for a prolonged period, fully charge the battery
beforehand.
One charging method is to connect the AC adapter directly to the gigabeat,
another method is to use the USB CRADLE. Note that a USB connection with
the PC will also permit charging.
If you are using the gigabeat for the first time after purchase, or when the
gigabeat hasn't been used for a prolonged period, fully charge the battery
beforehand.
One charging method is to connect the AC adapter directly to the gigabeat,
another method is to use the USB CRADLE. Note that a USB connection with
the PC will also permit charging.
Set the BATTERY switch on the bottom of the main unit to ON.
This switch prevents over-discharge of the built-in battery after shipment.
Set the BATTERY switch to ON the first time the gigabeat is used after purchasing it.
If you will not be using the gigabeat for a prolonged period, set the BATTERY switch
to OFF.
to OFF.
2
1
3
Charging the Built-in Battery
Direct Charging from the AC Adapter
Connect the AC adapter to the gigabeat in the order indicated in the diagram below.
● Preparation
Connect to
the outlet.
the outlet.
Setting the BATTERY switch to OFF will return all of the settings to their default
values (which is the condition when the gigabeat was first used after purchasing
it).
values (which is the condition when the gigabeat was first used after purchasing
it).
gigabeat F60_OP16-32(E)â¸î
05.4.15, 3:24 PM
30