Sony CDX-F7705X Manual De Usuario
30
Error displays/Messages
*1
When the CD/MD changer is connected to the unit,
the disc number of the CD or MD appears in the
display.
the disc number of the CD or MD appears in the
display.
*2
The disc number of the disc causing the error
appears in the display.
appears in the display.
*3
“Failure” (small case) and “FAILURE” (upper case)
are different messages.
are different messages.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
situation, consult your nearest Sony dealer.
Radio reception
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
The stations cannot be received.
The sound is hampered by noises.
The sound is hampered by noises.
• Connect a power antenna control lead (blue)
or accessory power supply lead (red) to the
power supply lead of the car’s antenna
booster. (Only if your car has a built-in FM/
AM antenna in the rear/side glass.)
power supply lead of the car’s antenna
booster. (Only if your car has a built-in FM/
AM antenna in the rear/side glass.)
• Check the connection of the car antenna.
• The auto antenna will not go up.
• The auto antenna will not go up.
t Check the connection of the power
antenna control lead.
• Check the frequency.
• When the DSO mode is on, the sound is
• When the DSO mode is on, the sound is
sometimes hampered by noises.
t Set the DSO mode to “OFF” (page 24).
t Set the DSO mode to “OFF” (page 24).
Automatic tuning is not possible.
• The local seek mode is set to “on.”
t Set the local seek mode to “off”
(page 23).
• The broadcast signal is too weak.
t Perform manual tuning.
The “ST” indication flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
t Set to the monaural reception mode
(page 23).
A program broadcast in stereo is heard in
monaural.
monaural.
The unit is in monaural reception mode.
t Cancel monaural reception mode
(page 23).
Interference occurs during FM reception.
The wide mode is selected.
t Set the IF mode to “IF-Auto” (page 23).
t Set the IF mode to “IF-Auto” (page 23).
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
seconds, and an alarm sound will be heard.
Blank
*
1
No tracks have been recorded on an MD*
2
.
t Play an MD with recorded tracks on it.
Error
*
1
• A CD is dirty or inserted upside down*
2
.
t Clean or insert the CD correctly.
• A CD/MD cannot play because of some
problem*
2
.
t Insert another CD/MD.
Failure
*
3
(Illuminates until any button is pressed.)
The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this
incorrect.
t See the installation guide manual of this
model to check the connection.
FAILURE
*
3
(Illuminates for about 1 second.)
When the XM tuner is connected, storing an
XM radio channel into a preset failed.
t Be sure to receive the channel that you
XM radio channel into a preset failed.
t Be sure to receive the channel that you
want to store, then try it again.
High Temp
The ambient temperature is more than 50°C
(122°F).
t Wait until the temperature goes down
(122°F).
t Wait until the temperature goes down
below 50°C (122°F).
NO Disc
*
1
No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.
t Insert discs in the CD/MD unit.
NO Magazine
The disc magazine is not inserted in the CD
unit.
t Insert the magazine in the CD unit.
unit.
t Insert the magazine in the CD unit.
NO Music
*
2
A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD
unit.
Offset
There may be an internal malfunction.
t Check the connection. If the error
t Check the connection. If the error
indication remains on in the display,
consult your nearest Sony dealer.
consult your nearest Sony dealer.
Push Reset
The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.
of some problem.
t Press the RESET button on the unit.
Messages
Local Seek +/–
The local seek mode is on during automatic
tuning (page 17).
tuning (page 17).
“
” or “
”
You have reached the beginning or the end of
the disc and you cannot go any further.
the disc and you cannot go any further.