Sony 2008H05-1 Manual De Usuario
SCD-XA5400ES
6
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Front Panel
" / (power) switch
Turns the power of the player on or off.
To let the player enter power-saving mode
(standby mode), press =/ (power) on the remote
or on the player.
To let the player enter power-saving mode
(standby mode), press =/ (power) on the remote
or on the player.
# TIME/TEXT button
Switches the playing time of the track, the
remaining time of the disc, or TEXT information
on the display.
remaining time of the disc, or TEXT information
on the display.
$ MULTI/2CH button
Selects the playback area when a disc with the 2-
channel area and the multi-channel area (page 8) is
loaded.
channel area and the multi-channel area (page 8) is
loaded.
% SA-CD/CD button
Switches between the Super Audio CD layer and
the CD layer of a hybrid disc.
the CD layer of a hybrid disc.
& HDMI button/lamp
Sets whether the audio signal is output from the
HDMI OUT jack or not.
When the lamp is lit, sound is output from the
HDMI OUT jack.
When the lamp is not lit, sound is output from the
ANALOG OUT jacks and DIGITAL OUT (CD)
jacks.
HDMI OUT jack or not.
When the lamp is lit, sound is output from the
HDMI OUT jack.
When the lamp is not lit, sound is output from the
ANALOG OUT jacks and DIGITAL OUT (CD)
jacks.
' Disc tray
Holds a disc.
( " button
Opens and closes the disc tray.
) / button and lamp
Plays a disc. The lamp lights up during playback.
* 9 button and lamp
Pauses playback. The lamp lights up during
playback pause.
playback pause.
+ Y button
Stops playback
, AMS dial (AMS: Automatic Music
Sensor)
Selects a track.
Selects a track.
- Display window
Displays information on the disc or current track.
. Remote sensor
Receives the signal from the remote.
/ PHONE LEVEL
Adjusts the headphones volume.
0 PHONES jack
Connects the headphones.
Rear Panel
" IR REMOTE IN jack
Equipped on the models for the U.S. and Canada
only.
Connects an IR repeater.
only.
Connects an IR repeater.
# ANALOG OUT BALANCED L/R jacks
Connects a component with XLR input jacks, such
as stereo amplifiers, etc., using an XLR (balanced)
cable (not supplied).
as stereo amplifiers, etc., using an XLR (balanced)
cable (not supplied).
$ HDMI PRIORITY MULTI/2CH switch
When both multi-channel area and 2-channel area
are recorded on a Super Audio CD layer, sets the
area that is given priority to be played back.
are recorded on a Super Audio CD layer, sets the
area that is given priority to be played back.
% HDMI OUT jack
Connects components with HDMI jacks, such as
HDMI-compliant amplifiers, etc.
HDMI-compliant amplifiers, etc.
& DIGITAL OUT (CD) COAXIAL jack
Connects a component with the coaxial digital
input jack, such an MD deck, etc.
input jack, such an MD deck, etc.
' DIGITAL OUT (CD) OPTICAL jack
Connects a component with the optical digital
input jack, such an MD deck, etc.
input jack, such an MD deck, etc.
( DIGITAL OUT (CD) ON/OFF switch
Sets whether audio signals are output from the
DIGITAL OUT (CD) jacks or not.
DIGITAL OUT (CD) jacks or not.
) AC IN jack
Connects the supplied AC power cord (mains
lead).
lead).
* ANALOG OUT UNBALANCED L/R jacks
Connects a component with analog input jacks,
such as stereo amplifiers, etc., using an audio
connecting cord.
such as stereo amplifiers, etc., using an audio
connecting cord.
About the IR REMOTE jack
You can operate the player without pointing the
remote toward the remote sensor of the player if
you connect an IR repeater (not supplied) to the
IR REMOTE jack.
Use an IR repeater when you install the player in
a place where signals from the remote cannot
reach.
remote toward the remote sensor of the player if
you connect an IR repeater (not supplied) to the
IR REMOTE jack.
Use an IR repeater when you install the player in
a place where signals from the remote cannot
reach.
IR repeater
(not supplied)
(not supplied)
SCD-XA5400ES
RM-ASU042