Audiovox P153B Manual De Usuario

1. Make sure the front panel is oriented correctly when sliding it into the front mounting plate,  as it cannot be attached when up-side

down.  Use moderate pressure to fully seat the panel into position.

2. To verify correct panel installation, swing the panel assembly up into position until it locks easily into place. If any resistance is

encountered, re-check panel orientation in chassis mounting plate.

NOTE: When the faceplate is in the upright position, press the release button to lower the faceplate away from the radio chassis.

3. When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage.  Make sure

there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other
malfunctions.

-11-

1.   Switch the vehicle ignition and radio “on”.

2.   Press  and release the Time/Frequency  button to access the time display; then press and hold the T/F button until  the   time

   colon begins to flash.

3.   With the time colon  flashing, press the Down Tuning   ( 

 )  button  to adjust  the hours and AM/PM indication, or  the   Up

  Tuning ( 

  ) button to adjust  the minutes indication  to the correct  time.

4.  Five seconds after the last hour or minute adjustment is made, the time will be set  into the unit and the display  will  return  to

   the normal indication.