JL Audio SB-J-GCHER3/10W1v2/TN Manual De Usuario
Continued on Next Page
SB-J-GCHER3/10W1v2_INSTR_SKU#011235
SB-J-GCHER3/10W1v2_INSTR_SKU#011235
S T E P 7
With a small flat head screw driver, pop off the small cover
that is located on the top half of the c-pillar.
With a small flat head screw driver, pop off the small cover
that is located on the top half of the c-pillar.
With Phillips head screw driver, remove the screw that has
been exposed.
been exposed.
Remove this top half of the c-pillar.
S T E P 6
Remove the flooring from the vehicle.
Remove the flooring from the vehicle.
S T E P 5
Remove the false floor.
Remove the false floor.
Remove the two mounting bolts that secure the flooring to
the vehicle.
the vehicle.
S T E P 4
Remove the tailgate’s bottom sill plate.
Remove the tailgate’s bottom sill plate.
Page 2 • JL Audio, Inc 2007
S T E P 9
With a Phillips head screw driver, remove the screw from the
rear section of the plastic panel.
With a Phillips head screw driver, remove the screw from the
rear section of the plastic panel.
S T E P 1 1
Remove the tailgate’s upper sill plate.
Remove the tailgate’s upper sill plate.
S T E P 1 0
With an hex key, remove the screw and D-ring from the rear
section of the plastic panel.
With an hex key, remove the screw and D-ring from the rear
section of the plastic panel.
S T E P 8
With a Phillips head screw driver, remove the screw from the
front section of the plastic side panel.
With a Phillips head screw driver, remove the screw from the
front section of the plastic side panel.