Classe Audio SSP-800 Manual De Usuario

38

Th

  e Max Volume page allows you to establish a maximum volume setting 

for your system. Th

  is scale runs from 0 to 100, with 100 indicating that you 

do not want any artifi cial limit placed on the maximum gain your Surround 
Sound Processor can provide. Th

  is setting is interactive. You can set the value 

to something less than 100, and then adjust the volume to see whether it is 
appropriate.

Touching the Startup Volume option allows you to set up a preferred volume 
level for when the SSP-800 wakes out of standby. Th

  is starting volume level can 

be confi gured in two ways:

• the Last Volume option sets the starting volume to the last level selected 

before the unit was powered down. Th

  e mute setting is also remembered.

• the Specifi c option allows you to set a specifi c volume level with the mute 

control on or off .

Touching the IR option displays the IR volume speed setup page, shown below.  
Similar to the rotary knob setup, the IR volume speed controls the degree at 
which the volume is stepped through when the remote control volume button 
is pressed. Th

  ree settings are available – Fast, Normal, and Slow. Th

 e default 

setting is Normal.