Classe Audio SSP-800/CT-SSP Manual De Usuario

40

The Max Volume page allows you to establish a maximum volume setting 

for your system. This scale runs from 0 to 100, with 100 indicating that you 

do not want any artificial limit placed on the maximum gain your Surround 

Sound Processor can provide. This setting is interactive. You can set the value 

to something less than 100, and then adjust the volume to see whether it is 

appropriate.

Touching the Startup Volume option allows you to set up a preferred volume 

level for when the SSP wakes out of standby. This starting volume level can be 

configured in two ways:

•  the Last Volume option sets the starting volume to the last level selected 

before the unit was powered down. The mute setting is also remembered.

•  the Specific option allows you to set a specific volume level with the mute 

control on or off.

Touching the IR option displays the IR volume speed setup page, shown below.  

Similar to the rotary knob setup, the IR volume speed controls the degree at 

which the volume is stepped through when the remote control volume button 

is pressed. Three settings are available – Fast, Normal, and Slow. The default 

setting is Normal.