Classe Audio SSP-800/CT-SSP Manual De Usuario

52

brightness

The Brightness setting of the SSP front panel touchscreen has three possible 

values: low, medium, and high. Select the appropriate setting based on the level 

of ambient light typically found in your listening room while using the system. 

A high brightness setting usually works best in brightly-lit rooms; you may

find that a lower setting is less visually intrusive under more subdued lighting 

conditions.

timeout

If you prefer listening to music in a dimly-lit or darkened room, you may 

find even the low brightness setting of the display somewhat distracting. You 

can essentially turn off the touchscreen by reducing the timeout value of the 

backlighting so as to turn it off entirely after a period of inactivity you select. In 

this context, activity refers to any use of the user interface. This includes hard 

buttons, the LCD touchscreen, and the remote control.

For example, if you reduce the timeout to its minimum setting, the backlighting 

illuminates the display as soon as you interact with any of the SSP controls, and 

remains lit for only three seconds – just long enough for you to check a setting. 

If you continue to use any of the controls (at least once every three seconds), the 

display remains lit. After three seconds of inactivity on your part, the backlight 

extinguishes itself, essentially turning off the touchscreen. Or, if you prefer 

to have the active source preview, instead of a black screen, you can select the 

timeout value of the touchscreen and then highlight video on timeout. When 

the touchscreen timeout value is reached, the active video source is shown on the 

touchscreen.

If you prefer the display of the SSP to remain on whenever not in Standby 

mode, select the Never option. The lamp in the touchscreen display is 

designed for harsh automotive environments and will give you many years of 

reliable operation. If you plan to leave the unit on continuously, however, we 

recommend that you keep the timeout delay set to less than one minute.

language

The Language menu offers a choice between six different languages supported 

by the SSP-800/CT-SSP. The language selected is then used for all touchscreen

and menu system text. Classé has also provided our international distributors 

with a software tool that makes it possible for them to customize the translations 

to suit their local customs and terminology. This allows us to be sure operation 

of the SSP is just as intuitive in countries other than its birthplace, Canada.

OSD (on screen display)

The SSP has two different types of OSD. First is the OSD used for system 

setup. This appears whenever the MENU button is pressed. The second is the

temporary OSD, which can report changes to the status of source selection, 

volume control, signal types, etc. Both types of OSD may be disabled 

completely by highlighting the osd disable button. Selecting Duration from 

the OSD menu allows you to define the amount of time events are displayed, 

up to a maximum of 5 seconds. The Events screen allows you to select which 

individual events you want displayed. To make your selection, scroll through the

list using the arrow keys on the right of the screen, then highlight the desired 

events. The default is for all events in the list to generate an OSD message.