Philips 40PFL4626D Manual De Usuario

29

EN

•  DVI-HDMI cable

 

•  HDMI cable and HDMI-DVI adaptor

 

•  VGA cable

 

Use Philips EasyLink

Get the most out of your HDMI-Consumer 

Electronic Control (CEC) compliant devices 

with Philips EasyLink enhanced control features. 

If your HDMI-CEC compliant devices are 

connected through HDMI, you can control 

them at the same time with your TV remote 

control.

To enable Philips EasyLink, you need to: 

•  Connect at least two HDMI-CEC 

compliant devices through HDMI

•  Configure each HDMI-CEC compliant 

device properly

•  Switch on EasyLink

Note

 

•

The EasyLink-compliant device must be switched on 

and selected as the source.

 

•

Philips does not guarantee 100% interoperability with 

all HDMI CEC devices.

Switch on or off EasyLink

When you play a HDMI-CEC compliant device, 

the TV switches on from standby, and switches 

to the correct source.

Note

 

•

If you do not intend to use Philips EasyLink, switch it off.

1 

Press  .

2 

Select [Setup] > [TV settings] > 

[EasyLink] > [EasyLink].

3 

Select [On] or [Off], then press OK.

Use one-touch play

1 

After you switch on EasyLink, press play on 

your device. 

 

»

The TV automatically switches to the 

correct source.