Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Philips
  4. 22PFL4507
  5. Manual De Usuario

Philips 22PFL4507 Manual De Usuario

Descargar
Página de 38
English
21
•  When the scanning and memorizing are completed, the lowest 
memorized channel will be displayed.
Autoprogram
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
ch
Exit
Note
 
•
After setting Autoprogram, using CH + / − skips unavailable programs automatically.
 
•
 If you are not receiving a signal from your cable service, contact the Cable provider.
 
•
If you press   or MENU / EXIT during autoprogram, the setup of TV channels will be 
canceled.
 
•
Even if Autoprogram is completed, the channel setting will be lost if the AC power 
cord is unplugged before the unit goes into Standby mode by pressing  .
 
•
The PIN Code will be required once you set a PIN code in the Child and ratings lock. 
➠
 
•
If you want to change your PIN code, follow the instruction of Change PIN. 
➠
Channel list
The channels selected here can be skipped when selecting the channels 
using CH + / −.
Those channels can still be selected with the NUMBER buttons.
1
  Use ▲▼ to select Channel list, then press OK.
2
  Use ▲▼ to select the channel you want to remove, then press 
OK.
Picture
DTV 
11.1
Sound
Highlight channels for
Ch Up / Down key selection.
DTV  11.2
Setup
DTV  11.3
Features
Language
USB
Ch Select
Watch / Skip
Back
•  The channel display for the removed channel darkens. You will 
not be able to select the channel again using CH + / −.
•  To reactivate a removed channel, use ▲▼ and press OK. The 
registered channels are highlighted.
•  When you remove a main channel, its subchannels are removed 
as well.
Note
 
•
The channel with DTV indicated on the display is ATSC. Otherwise the channel is 
Analog TV.
Add channels
This function lets you add the off the air Analog TV or Analog Cable 
channels that were not added by the autoprogram due to reception 
conditions during the initial setting.
1
  Use ▲▼ to select Add channels, then press OK.
2
  Use the NUMBER buttons to enter the number of the channel you 
want to add, then press OK.
Picture
Add channels
Sound
For analog channels, select a
channel to be added using
number keys.
For digital channels, you must
perform Autoprogram function.
Setup
Features
Language
USB
Ch Change
Back
Note
 
•
If setup completes successfully, Added to the channel list. is displayed.
 
•
If external Input is used, it is not possible to register the channel and Unavailable will be 
displayed on the TV screen.
 
•
Some channels cannot be selected by CH + / −. Use the NUMBER buttons to select 
the memorised channels.
Antenna confirmation
DigitalTVoperation
This function lets you check the Digital signal strength of each channel.
1
  Use ▲▼ to select Antenna, then press OK.
2
  Use the NUMBER buttons or CH + / − to select the channel for 
which you want to check the Digital signal strength.
Picture
Back
Sound
Setup
Current
50
Max
50
Features
Language
USB
Ch Change
Note
 
•
If the channel is set to Analog channel or external Input, you cannot confirm the 
antenna condition.