Triax UFO 100 Manual De Usuario

5

GB

Weak or missing signal 
-check LED on power supply 
(PSU)

NO light indicates no voltage.
Often this is coursed by a short 
or a missing connection in the 
coax-cable or the cable con-
nectors

Remove the cable from the 
PSU, if the LED goes ON, 
there is a short in the cable. 
Then repair or replace the 
cable. 
If the LED is still off replace 
the PSU.

Weak or missing signal 
-check LED on power supply 
(PSU)
-check LED on UFO 

NO light indicates no voltage.
Often this is coursed by a short 
or a missing connection in the 
coax-cable or the cable con-
nectors 

If the LED is ON at the PSU, 
there is probably a missing 
connection in the cable or 
connectors.
Repair or replace.

Interference; herring-bone pat-
tern or  white horizontal stripes 
in the picture.

Interference is often caused by 
different electronic equipment 
- mobile phones, computers 
or transmitters -being used in 
close proximity to the UFO.

Increase the distance – in-
crease the height of the UFO

Ghosting; double pictures

Ghosting is caused by the TV 
signal being reflected from 
buildings, large ships etc.

Changing position a few 
meters, will often solve the 
problem.