Classe Audio CAV-75 Manual De Usuario

 

 

 

4 

-       -   

 

 

 

UNPACKING & SET-UP 
 
 

 

Your Classé CAV-75 multi-channel power amplifier is packed in high density, semi-rigid 

foam placed in a special cardboard box. To remove the unit, open and spread all the top flaps of the 

box and by its sides, lift out the entire unit and put it on a large flat surface. Take it out of the plastic 

bag and inspect the unit for any concealed damage. Apart from this owner's manual, please ensure 

the following have also been included: 

  1) 

Detachable 

linecord. 

 

 

2) Allen key for top plate. 

Please report any damage or missing parts to your dealer as soon as possible.  

 

Place the CAV-75 at or near its final set-up position, allowing 8 inches at the rear for 

tightening the speaker output connectors. For optimum sonic performance, we recommend the 

optional 

CLASSÉ REFERENCE A.C. LINECORD

. Consult your dealer regarding this accessory. 

 

The power transformer in the CAV-75 is located at the front-left of the unit. Ideally, a few 

feet should separate this area from components which potentially could pick up hum.  These 

include preamplifiers, turntables, and interconnect cables. In terms of providing adequate airspace 

for cooling, a good rule of thumb is to allow 6 inches above and 3 inches on each side of the unit. 

 

Check the Serial Number sticker on the back of the unit for the correct operating voltage. 

The CAV-75 has one line fuse (external), the rating of which should be as follows: 

 

 

 

  LINE VOLTAGE              FUSE RATING      

       

  

 

 100 or 120 V.A.C.        5 AMP SLOW BLOW  125 or 250 volts 

     

 

 

 220 or 240 V.A.C.        3 AMP SLOW BLOW  250 volts