Jensen XA4200 Manual De Usuario
®
XA4200, XA4300
11
When the input selector is set to
4 CH, the amplifier will operate as
a standard 4 channel amp with all
RCA inputs connected.
4 CH, the amplifier will operate as
a standard 4 channel amp with all
RCA inputs connected.
4 Channel
2CH
4CH
3CH
LR
RR
INPUT
OUTPUT
LF
RF
REAR
HI-LEVEL
FRONT
HI-LEVEL
INPUT
OUTPUT
When the input selector is set to
3 CH, the amplifier is configured for
stereo/mono operation. The front
channels of the amplifier operate in
stereo mode. The rear channels of
the amplifier are internally bridged
for mono operation. In 3 CH the
following RCA inputs will be used:
3 CH, the amplifier is configured for
stereo/mono operation. The front
channels of the amplifier operate in
stereo mode. The rear channels of
the amplifier are internally bridged
for mono operation. In 3 CH the
following RCA inputs will be used:
3 Channel
2CH
4CH
3CH
RR
INPUT
OUTPUT
LF
RF
REAR
HI-LEVEL
FRONT
HI-LEVEL
INPUT
OUTPUT
When the input selector is set to
2 CH, the amplifier is configured for
bridged stereo operation. The
amplifier will need a two channel
input even though there are four
inputs. In the 2 CH the following
inputs will be used:
2 CH, the amplifier is configured for
bridged stereo operation. The
amplifier will need a two channel
input even though there are four
inputs. In the 2 CH the following
inputs will be used:
2 Channel
2CH
4CH
3CH
RR
INPUT
OUTPUT
LF
REAR
HI-LEVEL
FRONT
HI-LEVEL
INPUT
OUTPUT
2CH/3CH/4CH
The XA4200/XA4300 can be configured for three
different input modes: 4 channel, 3 channel or
2 channel.
different input modes: 4 channel, 3 channel or
2 channel.
Note
Although the above illustrations indicate the
low level input being used, the same
connections would apply to the high level
input.
Although the above illustrations indicate the
low level input being used, the same
connections would apply to the high level
input.
INPUT
OUTPUT
REAR
HI-LEVEL
FRONT
HI-LEVEL
INPUT
OUTPUT
High Inputs
5910 XA4CH_E.p65
01/23/01, 12:24 PM
11