Motorola DSR-6400 Manual De Usuario

DSR-6400 Series 

Press the 4 button until the cursor is at the GigE Default Gateway label, and press ENTER to 

move into the field. Use the arrow buttons (4) to enter the desired address and then press 

ENTER to confirm the selection and exit the field.

Press the  buttons until the Port GigE TS Mode menu appears. Use this menu to select which 

transport streams are routed to the GigE port and if the DSMCC data is also routed to the GigE port.

Press the 4 button until the cursor is at the TS Mode label, and press ENTER to move into the 

field. Press the  buttons to choose one of the four options: Off, Transcoded, Passthru, or 

Transcoded+Passthru. When Passthru is selected, a copy of the ASI OUT 1 transport stream is 
routed to the GigE port. When Transcoded is selected, a copy of the ASI OUT 2 transport stream 
is routed to the GigE port. When Transcoded+Passthru is selected, a copy of both ASI OUT 1 and 
ASI OUT 2 are routed to the GigE port. Press ENTER to confirm the selection and exit the field.

DSMCC data is IP data that is carried in the MPEG stream from the programmer. It is part of a 
programmer service and different programmer services may carry the same or different DSMCC 
data. The unit extracts the DSMCC data and outputs it as an IP stream from the GigE port. 

Press the 4 button until the cursor is at the DSMCC label, and press ENTER to move into the field. 

Press the  buttons to choose either Off or On. When On is selected, the unit outputs only the 

DSMCC data from the first processor path (PR1). DSMCC data is not usually continuous, and so 
the unit only outputs DSMCC data when DSMCC data is present in the programmer service that is 
handled by the first processor. DSMCC data from other processor paths 2, 3, or 4 is disregarded. 
Press ENTER to confirm the selection and exit the field. When Off is selected, the unit does not 
output DSMCC data.

Transcoded and Passthru transport streams are separate and unique streams that can share the one 
physical GigE output port. The next two Port GigE IP menus described in this section provide a way 
to route each of these streams.

PORT GigE TS Mode              DSMCC
    E       Off                   Off